Your shopping cart is empty!
4MP HD IP Camera (H Series) | NC304-VBA
Features:
- 1/3" 4MP CMOS Sensor
- ICR, WDR, 3D DNR, BLC
- 20fps@4MP, 30fps@2MP
- 2.8~12mm Vari-Focal Lens, IR LEDs
- microSD (up to 64GB)
- DC 12V/PoE
- IP66 & IK10
Specifications:
| Camera | |
| Image Sensor | 1/3" Progressive Scan CMOS |
| Effective Pixels | 2688 × 1520 |
| Electronic Shutter | 1/3 s to 1/10,000 s |
| Mini. Illumination | 0.01Lux @(F1.2,AGC ON), 0.014 Lux @(F1.4,AGC ON), 0 Lux with IR |
| Lens Focal Length | 2.8~12mm @ F1.4 Vari-Focal Lens |
| Adjustment Range | Pan: 0° ~ 355°, Tilt: 0° ~ 75°, Rotation: 0° ~ 355° |
| Camera Features | |
| IR LEDs Distance | Approx 20 to 30 meters(65.6-98.4ft) |
| Day / Night | IR cut filter with auto switch ( Auto/Schedule/Triggered by Alarm In ) |
| Noise Reduction | 3D DNR |
| BLC | Yes |
| WDR | 120 dB |
| Function | Rotate Mode, Saturation, Brightness, Contrast, Sharpness adjustable by client software or web browser |
| Video | |
| Video Compression | H.264/MJPEG/H.264+ |
| Frame Rate | 50Hz: 20fps (2688×1520), 25fps(1920×1080), 25fps(1280×720) ; 60Hz: 20fps (2688×1520), 30fps (1920×1080), 30fps(1280×720) |
| Bit Rate | 32Kbps~16Mbps |
| ROI | Supports |
| Video & Audio | |
| Audio In | 1CH |
| Audio Out | 1CH |
| Alarm | |
| Trigger Events | Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception |
| Network | |
| Ethernet | 1 RJ45 10M / 100M Ethernet interface |
| Network Storage | NAS (Supports NFS, SMB/CIFS), ANR |
| Protocol | TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
| Network Security | One-key reset, flash-prevention, dual streams, heartbeat, mirror, password protection, privacy mask, Watermark, IP address filtering, Anonymous access |
| Compatibility | ONVIF (Profile S, Profile G), PSIA, CGI, ISAPI |
| Storage | |
| Storage | Micro SD/SDHC/SDXC card with ANR (up to 128G), NAS (Support NFS, SMB/CIFS) |
| Auxiliary Interface | |
| Alarm | 1ch alarm I/O |
| General | |
| Power Supply | 12 V DC ± 10%, PoE (802.3af) |
| Power Consumption | Max. 5.5W |
| Working Environment | -30 °C ~ 60 °C (-22 °F ~ 140 °F) Humidity 95% or less (non-condensing) |
| Protection | IP66 |
| Dimensions | Φ 140 × 99.9 mm (Φ 5.51” × 3.94”) |
| Weight | 1000g (2.2 lbs) |
Write a review
Your Name:Your Review: Note: HTML is not translated!
Rating: Bad Good
Enter the code in the box below:
© Copyright 2005. Optima Security Online.