4MP HD IP Camera (H Series) | NC304-XT-2.8

4MP HD IP Camera (H Series) | NC304-XT-2.8
Brand: H Series
Product Code: OP-NC304-XT-28
Availability: In Stock
Qty:  
   - OR -   

​​​Features:

  • 1/3" 4MP CMOS Sensor
  • ICR, WDR, 3D DNR, BLC
  • 20fps@4MP, 30fps@2MP
  • 2.8 Fixed Lens, EX IR LEDs
  • DC 12V/PoE
  • IP66

​​​Specifications:

Camera
Image Sensor 1/3" Progressive Scan CMOS
Effective Pixels 2688 × 1520
Electronic Shutter 1/3 s to 1/10,000 s
Mini. Illumination 0.01Lux @ (F1.2, AGC ON) ,0 Lux with IR
Lens Focal Length 2.8mm @ F2.0 Fixed Lens
Adjustment Range Pan: 0° ~ 360°, Tilt: 0° ~ 75°, Rotation: 0° ~ 360°
Camera Features
IR LEDs Distance Up to 30m
Day / Night IR cut filter with auto switch
Noise Reduction 3D DNR
BLC Yes, zone configurable
WDR 120 dB
Video
Video Compression H.264/MJPEG/H.264+
Frame Rate 50Hz: 20fps (2688×1520), 25fps(1920×1080), 25fps(1280×720) ; 60Hz: 20fps (2688×1520), 30fps (1920×1080), 30fps(1280×720)
Bit Rate 32Kbps~16Mbps
ROI Supports
Alarm
Trigger Events Motion detection, tampering alarm, network disconnect , IP address conflict, storage exception
Network
Ethernet 1 RJ45 10M / 100M Ethernet interface
Network Storage NAS (Supports NFS, SMB/CIFS), ANR
Protocol TCP/IP, UDP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour
Network Security Flash-prevention, dual stream, heartbeat, mirror, password protection, privacy mask, watermark, IP address filtering, Anonymous access
Compatibility ONVIF (Profile S, Profile G), PSIA, CGI, ISAPI
General
Power Supply 12 VDC ± 10%, PoE (802.3af)
Power Consumption Max. 5.5W (Max. 7.5W with ICR on)
Working Environment -30 °C ~ 60 °C (-22 °F ~ 140 °F); Humidity 95% or less (non-condensing)
Protection IP66
Dimensions Φ127×97.5 (5.0” × 3.8”)
Weight 670g (1.5 lbs)

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below:



© Copyright 2005. Optima Security Online.